How to Repair Broken Car Keys
You'll need a quick solution in the event that your car key is damaged. You can either wait for the dealer to give you a replacement, which is inconvenient, or find other ways to travel, such as taking public transport or relying on your friends to take you around.
If you've got the right tools, you can perform some DIY fixes. These include needle-nose pliers as well as penetrating oil.
Assessing the damage
It's a nightmare to get in your car and realize that your ignition key is damaged. This is a frequent issue that can occur to anyone, and can be extremely stressful when you're in a rush to get where you need to go.
Take a deep breath, and don't get stressed. Being calm will allow you to make logical decisions and avoid further damage.
Then, you should examine the broken key to see which parts are still in good condition and how much of the break is in the lock or ignition cylinder. Spray WD-40 or any other fluid on the area, in the event that the broken piece is in the lock. This will help loosen the part and make it easier to remove. If the broken piece is in the ignition, you'll need to remove it with a special tool called key extractor.
If the key remains inside the key ring, you may try to bend the key back into place with pliers. This can be a difficult task, particularly in the event of a break near a connector. If you are unable to bend it back into position, use a paperclip and pull straight outward.
If you try to force the key into the ignition, it could cause more damage. It could even become impossible to remove. If you're unable to remove the broken key, it's best to seek out a professional locksmith, or visit the dealership for your car.
There are a variety of hacks available online that claim to fix damaged car keys, however certain methods can cause more damage. If you try to remove a broken car key using the help of a screwdriver, it could force the key further into the ignition. It can even damage the lock. To avoid this, do not insert anything other than a tool specifically designed to remove keys into the keyhole.
Removal of the damaged part
Car keys are delicate, and a slight impact or use can cause them break off inside the ignition. This kind of issue could be difficult to fix without the assistance of an expert locksmith. You could cause more damage by attempting to fix the broken key. Super glue and other hacks are not recommended as they are difficult to remove and could cause further damage to the ignition cylinder.
Utilizing a magnet to take out the broken key is an unwise idea. Magnets can cause damage to the electrical components of the ignition cylinder and make it harder to get the broken key piece out. Making excessive force or abrupt movements when attempting to turn the key is another common mistake that can result in a broken car key.
If the key fragment remains visible and exposed, pliers or tongs can be employed. If the key isn't visible and stuck in the ignition, smaller hacksaws or any other thin-profiled tool can be wedged in order to grab the edge and then pull it out.
Another option is to use penetrating oil to lubricate the keyhole and reduce friction. If you apply the oil and allow it to sit for a couple of minutes, it will make it easier to remove the broken key fragment. If the oil doesn't work, you can use the key extractor to take the broken key fragment from the ignition.
A locksmith will have to replace the key if it is completely damaged in the ignition. A locksmith will reassemble all the parts and use the template to create a key that is as similar to the original as it is possible. This method ensures that the new key will work well and minimizes the possibility of misalignment in the lock or ignition system. This can cause further problems which can need costly and time-consuming repair. It is recommended to check regularly and replace car keys to avoid them becoming damaged or worn out to the point of breaking.
Remove the Broken Blade from the Ignition
If you're fortunate enough to have the key part do not put it in the ignition, or you could cause further damage. You can use any tool you own to remove it in a safe manner.
In this situation Tweezers can be a lifesaver. They can grasp a damaged piece of a key for your car and assist you in pulling it out. Also, dental picks are small pointed tools that can work. You could also try a wire coat hanger, which is flexible enough to fit inside the lock. You may want to try tapping the metal on a solid surface before and then try to shake the key that has been broken loose.
You can also use a mini hacksaw, which is available in most hardware stores. It is less brittle than a screwdriver, and it can be inserted into the lock to secure the broken car key piece. This may be enough to take it off without damaging the ignition. You could also try using needle-nose pliers, which are thin and can connect to the broken car key piece. If you're attempting using a tool such as this, be sure you keep acetone and cotton swabs handy to get any glue from the tip of the pliers once you've removed it.
It's not a great idea to use magnets to remove the damaged car key. Magnets should not be used near an ignition, as they could cause damage to electrical components. They can also push broken key fragments deeper into the ignition, which makes it difficult to remove.
Once you've gotten the key out and you're ready to inspect the ignition to see whether there are any visible signs of damage. If you notice cracks or bending it is recommended to contact an expert locksmith. They can replace your keys without damaging the ignition of your vehicle. They can also give you advice about how to prevent further damage in the near future. Keep both pieces of the broken car key. This will allow them to understand the original shape and design and make an identical key for you.
How do I obtain a new key
There are a few things you can do when your car keys break. The most important thing to keep in mind is not to insert your broken key into the lock or ignition, because this could cause further damage and lead to costly repairs in the future. It is best to call an expert locksmith to make a fix.
The cap of the plastic on your key with clear tape will provide support and protect against further damage. Super glue is another option. To do car key repair TheKeyLab , clean the broken pieces and apply a small dab of super glue to each. Once the glue has dried, you can try to press the pieces together and hope that your key will work.
You can also contact the dealer to get an alternative key. This is a great option since it ensures that you have an exact match to your vehicle and that the key is correctly paired to the vehicle. In general it will cost more than using the services of a locksmith, but it could be the fastest and most efficient solution to your issue.
A professional locksmith will also be able to supply you with a spare key which can be handy in the event of a future emergency. You can also lower the possibility of your key breaking in the future by taking care of it, by using an appropriate key protector, and having a backup plan in case of emergency.
A break in a car key can be very difficult, especially when you try to start your car but find that it won't turn over. It can be tempting to take things into your own hands however, DIY fixes usually fail and lead to issues with locks and ignition systems. Furthermore when your key is in the ignition, and you force it further this could damage the key fob battery or cause other issues that require costly repair. It is best to consult a professional for these reasons. A professional locksmith for automotive can quickly and effectively fix the problem without damaging your car or causing more problems.
